(ASFV)African Swine fever virus antigen test kit (Colloidal gold)
Product name
African Swine fever virus Test Strip (Latex) Sample type
Serum, plasma, whole blood
Storage temperature
2°C - 30°C
Ingredients and Content
African Swine fever virus Test Strip (Latex) 10 tests/box; 25 tests/box; 50test/box
Sample buffe 1 bottle/box (1 OmL/bottle)
Dropper 10 pcs/box; 25 pcs/box; 50pcs/box
Instruction Manual 1 serving/box
[Intended use]
It is suitable for the rapid detection of African swine fever virus in porcine serum, blood and anticoagulated blood samples.
[Usage]
Read the IFU completely before testing, allow the test device and specimens to equilibrate to room temperature (15～30℃ or 59-86℉) prior to testing.
Method 1: For whole blood or anticoagulant blood
(1)Take out the test cassette from the sealed bag and use it within one hour after been opened.
(2) Place the product on a flat desk.
(3) Absorb the blood sample with the dropper and add 1 drop to the sample hole..
(4) Add 2 drops of buffer to the sample hole of the test cassette, and start timing.
(5) Interpret the result within 10 to 15 minutes.
Method 2: For serum
(1)Take out the test cassette from the sealed bag and use it within one hour after been opened.
(2) Place the product on a flat desk.
(3) Take 1 mL of collected porcine whole blood sample into a 1.5 mL centrifuge tube, centrifuge at 3500r/min for 5 minutes, take the upper serum sample with the dropper, add 1 drop to the sample hole.
(4) Add 2 drops of buffer to the sample hole of the test cassette, and start timing.
[Result judgment]
* Positive (+): The wine red bands of control line C and detection line T indicated that the sample contained foot-and- mouth disease type A antibody.
* Negative (-): No color developed on the test T-ray, indicating that the sample did not contain foot-and-mouth disease type A antibody.
* Invalid: No QC Line C or Whiteboard present indicating incorrect procedure or invalid card. Please retest.
[Precautions]
1. Please use the test card within the guarantee period and within one hour after opening:
2. When testing to avoid direct sunlight and electric fan blowing;
3. Try not to touch the white film surface in the center of the detection card;
4. Sample dropper cannot be mixed, so as to avoid cross contamination;
5. Do not use sample diluent that is not supplied with this reagent;
6. After the use of detection card should be regarded as microbial dangerous goods processing;
[Application limitations]
This product is an immunological diagnostic kit and is only used to provide qualitative test results for clinical detection of pet diseases. If there is any doubt about the test results, please use other diagnostic methods (such as PCR, pathogen isolation test, etc.) to make further analysis and diagnosis of the detected samples. Consult your local veterinarian for pathological analysis.
