One Step Medical Diagnostic Rapid Syphilis Test Cassette Diagnostic Kit
Syphilis Antibody Rapid Test Kit
SUMMARY
The general method of detecting infection with TP is used for in vitro qualitative detection of Syphilis (TP) Antibody in human whole blood, serum or plasma samples.The test is based on Colloidal gold method and can give a result within 15 minutes.
INTENDED USE
The One Step TP Test is a Colloidal Gold enhanced,.Clinically, this product is mainly used for the auxiliary diagnosis of Treponema pallidum infection. This product is for medical personnel use only.
MAIN COMPONENT
1.Test pad, individually packaged in aluminum foil bag(25 piece(s)/kit)
2.Disposable plastic straw(25 piece(s)/kit)
3.Medical waste bag(25 piece(s)/kit)
4.Instruction manual(1 copy/kit)
Note: The components in the kits of different batch numbers are not interchangeable.
OPTIONAL COMPONENTS
口Sample diluent (25piece(s)/kit)
口Alcohol cotton pad(25 piece(s )/kit)
口 Blood collection needle(25 piece(s)/kit)
MATERIALS REQUIRED BUT NOT PROVIDED
Positive and negative controls (available as a separate item)
STORAGE & STABILITY
The original packaging should be stored in a dry place at 4-30℃ protected from light, and do not freeze.
SAMPLE COLLECTION AND STORAGE
2. Sample storage
2.1 Whole blood; Anticoagulant tubes are used for blood collection, and common anticoagulants can be used; if whole blood samples cannot be used immediately after collection, they can be stored at 2-8°C for 3 days,and the samples cannot be frozen.
2.2 Serum/plasma: The sample can be stored at 2-8℃ for 7 days, and it should be stored at -20℃ for long-term storage.
3.Only non-hemolyzed samples should be used.Severely hemolyzed samples should be resampled.
4 The refrigerated samples must be retuned to room temperature before the test. The frozen samples should be completely thawed, rewarmed, and mixed evenly before use. Do not freeze and thaw repeatedly
ASSAY PROCEDURE
1) Using the enclosed plastic dropper for the sample, dispense 1 drop (10μl) of Whole Blood /Serum / Plasma to the circular sample well of the test card
2) Add 2 drops of Sample Diluent to the sample well, immediately after the specimen is added, from the dropper tip diluent vial (or all contents from the single test ampule).
3) Interpret test results at 15 minutes.
